Required
Every home on the standard rate already pays a demand charge. Nothing to sign up for, so the savings case is immediate.
Opt-in
The utility offers a demand plan with cheaper energy. Move the homeowner over and hold the peak down. Check that the energy discount beats the demand charge first.
Segment
Standard homes have no usable demand charge. Large homes and farms land on a demand schedule once they cross the utility's kW threshold.
How the customer totals are built. Each state line adds up the customer figures of the programs listed under it. Those figures mix bases: some are residential accounts, some are whole-utility counts across every rate class, and a few are system totals that span more than one state. Territories do not overlap within a state, so the sum is a fair size comparison, but it is not a count of homes that qualify for a demand plan. Any program with no figure yet is shown separately as unknown.
How the opportunity index works. Customers multiplied by the demand charge in dollars per kW, multiplied by an access factor: 1.00 where the charge is required, 0.35 where the homeowner has to opt in, 0.05 where only large homes and farms qualify. The result is scaled so the largest single market reads 100. It ranks markets against each other. It is not a revenue forecast. Where a tariff figure is still to be pulled it uses a $5.00 per kW placeholder, marked on the card.
No markets match that filter. Clear the search or turn a plan type back on.
Has a demand charge, fails the DAC test
2 STATESA residential demand charge exists here and the homeowner really pays it, but the rate is too small for a DAC to earn back. Track them in case the rate moves.
Open leads
UNRESOLVEDHow to read a row
- Demand charge is the dollars per kW the home pays on its peak. The higher the number, the more a managed peak is worth.
- Peak window tells you which load drives the charge. A morning window means electric heat. An afternoon window means air conditioning.
- Verification is how solid the figure is. Green is read from the current tariff. Blue means the plan is confirmed but the dollar figure still needs pulling. Amber means the plan is reported and needs a direct tariff read before customer-facing use.
- ZIPs come from the counties each utility serves, not from utility boundary files. Where a county is split, confirm the serving utility by address.
Which homes to target
Best fit: all-electric homes where big loads stack. Electric heat or a heat pump with strip backup, electric water heater, EV, central air, pool. Aim for 25,000 kWh a year or more and at least three loads worth sequencing.
Walk away: gas heat and gas water heater with a single air conditioner. Little to sequence, so little to save.
Still open: Sierra Pacific in northern Nevada has not been read. Nevada already counts through Nevada Power.
Appendix: states with no residential TOU plus demand rate yet
Homes in these states pay for energy only, so there is no peak charge for the DAC to cut. Business accounts at most of these utilities still carry demand charges. Rate design moves, so these are worth rechecking once a year.
Utilities ruled out inside states that do qualify
These carry no usable residential demand charge, but their state qualifies through another utility. Confirm the serving utility by address before quoting.